Products 1-8 of 8
Show
Item#: 65355906
Availability: Ships in 1 week
Terex - Reedrill
If you are drilling in fractured rock (Limestone, lava rock, medium sand stone, coral and frozen earth), or drilling in a mix of dirt and rock, this is the tool that you need. The single row bullet tooth rock auger is our #1 selling auger. It will destroy fractured rock, frozen soil, compacted soil and contaminated fill dirt. It performs better and reduces total tooth cost by 80% over standard carbide flat teeth. This tool saves you time, money, and dramatically reduces equipment wear. Length:...
Item#: 65355614
Availability: Ships in 10 Days
Terex - Reedrill
Texoma "TXC" Series digger derrick augers are manufactured with 3/8" thick flighting sections as standard. The auger stem is 3 3/4" O.D. C-1026 heavy wall tubing. Hex hubs are constructed of ASTM-148 cast steel. Standard components are TX56 and TX58 carbide teeth and TX205 pilot bit. Length: 104". Available in 2-1/2" & 2-5/8" Hex Hub / Kelly Bar Sizes. Texoma "TXC" Series digger derrick augers are manufactured to maximize drilling performance in digger derricks, for loose and...
Item#: 65355909
Availability: Ships in 10 Days
Terex - Reedrill
If you are drilling in fractured rock (Limestone, lava rock, medium sand stone, coral and frozen earth), or drilling in a mix of dirt and rock, this is the tool that you need. The single row bullet tooth rock auger is our #1 selling auger. It will destroy fractured rock, frozen soil, compacted soil and contaminated fill dirt. It performs better and reduces total tooth cost by 80% over standard carbide flat teeth. This tool saves you time, money, and dramatically reduces equipment wear. Length:...
Item#: 65355699
Availability: Ships in 10 Days
Terex - Reedrill
Texoma "TXC" Series digger derrick augers are manufactured with 3/8" thick flighting sections as standard. The auger stem is 3 3/4" O.D. C-1026 heavy wall tubing. Hex hubs are constructed of ASTM-148 cast steel. Standard components are TX56 and TX58 carbide teeth and TX205 pilot bit. Length: 104". Available in 2-1/2" & 2-5/8" Hex Hub / Kelly Bar Sizes. Texoma "TXC" Series digger derrick augers are manufactured to maximize drilling performance in digger derricks, for loose and...
Item#: 65355915
Availability: Ships in 10 Days
Terex - Reedrill
If you are drilling in fractured rock (Limestone, lava rock, medium sand stone, coral and frozen earth), or drilling in a mix of dirt and rock, this is the tool that you need. The single row bullet tooth rock auger is our #1 selling auger. It will destroy fractured rock, frozen soil, compacted soil and contaminated fill dirt. It performs better and reduces total tooth cost by 80% over standard carbide flat teeth. This tool saves you time, money, and dramatically reduces equipment wear. Length:...
Item#: 65355715
Availability: Ships in 10 Days
Terex - Reedrill
Texoma "TXC" Series digger derrick augers are manufactured with 3/8" thick flighting sections as standard. The auger stem is 3 3/4" O.D. C-1026 heavy wall tubing. Hex hubs are constructed of ASTM-148 cast steel. Standard components are TX56 and TX58 carbide teeth and TX205 pilot bit. Length: 104". Available in 2-1/2" & 2-5/8" Hex Hub / Kelly Bar Sizes. Texoma "TXC" Series digger derrick augers are manufactured to maximize drilling performance in digger derricks, for loose and...
Item#: 65355918
Availability: Ships in 10 Days
Terex - Reedrill
If you are drilling in fractured rock (Limestone, lava rock, medium sand stone, coral and frozen earth), or drilling in a mix of dirt and rock, this is the tool that you need. The single row bullet tooth rock auger is our #1 selling auger. It will destroy fractured rock, frozen soil, compacted soil and contaminated fill dirt. It performs better and reduces total tooth cost by 80% over standard carbide flat teeth. This tool saves you time, money, and dramatically reduces equipment wear. Length:...
Item#: 65355738
Availability: Ships in 10 Days
Terex - Reedrill
Texoma "TXC" Series digger derrick augers are manufactured with 3/8" thick flighting sections as standard. The auger stem is 3 3/4" O.D. C-1026 heavy wall tubing. Hex hubs are constructed of ASTM-148 cast steel. Standard components are TX56 and TX58 carbide teeth and TX205 pilot bit. Length: 104". Available in 2-1/2" & 2-5/8" Hex Hub / Kelly Bar Sizes. Texoma "TXC" Series digger derrick augers are manufactured to maximize drilling performance in digger derricks, for loose and...